olimpic k 560 Single-sided automatic edge bander
C$82,900.00
(Shipping and installation* included, taxes not included)
*Applicable only for models that require SCM installation
High performance and versatility: olimpic k 560 is designed for companies requiring to process many panels per day even though they may be different from one to another. olimpic k 560 has several solutions that guarantee always the best machining on any panel type
Automatic single-sided edge bander for the edge gluing with hot melt glue on straight panels, on the four panel sides, finishing and rounding-off of the panel corners
*Photos may include optional equipment. Please verify availability and compatibility under Product Details and Specs.
Item currently not available
K 560 TE INSTALLATION
Glue spreading roller with particular knurling: a perfect glue joint line.
“R-K” trimming unit: rapid machining changeover between thin, thick and solid wood edges thanks to the 3 automatic working positions.
“Touch 7” control unit: just a “touch” to use the machine.
Gluing unit: it carries out the automatic gluing with hot melt glue of edges in rolls and strips on straight panels.
- Base made of curved and welded steel plates to ensure a vibration free, highly rigid structure. Openings with shoots for the removal of shavings to the floor that are not collected by the dust extraction.
- Top presser made of curved and welded steel plates and supported with steel columns. It provides a vibration free structure on which the operating groups are located.
- Two rows of high-adherence rubber panel pressure wheels on the track and mounted on bearings. An enclosure covers the wheels.
- Manual adjustment of presser at the machine's infeed with positioning numerical readout
- Top operating groups fixed to the presser or mechanically connected on to it to allow the automatic positioning according to the panel thickness. Lower groups fixed to the horizontal beam for a precise reference with respect to the panel.
- All high frequency motors are equipped with static inverter.
- Safety enclosure on the entire length of the machine with poly-carbonate windows for the groups visualisation during machining.
- 2 doors for the access to the operating groups; the first one with the only electric interlocking for the gluing unit and the second one with electro-mechanical interlocking for the remaining groups.
- Exhaust outlets for the operating groups positioned on the top side of the safety enclosure
- Mobile control panel at machine infeed for an easy use from the operator''s working position
- Electrical cabinet in conformity with the current safety regulations.
- Electrical component positioned inside the base with door that allow an easy access in case of any maintenance operations.
- Feed track: made of pads coated with high friction rubber fixed on 1-1/4” industrial chain.
- Sliding of pads on two guideways (in hardened steel), one round and one flat, to ensure straightness of movement and resistance to side loads
- Manual pads lubrication.
- Panel support rollers positioned parallel to the track. It can be extended on the entire length of the machine. It is made of telescopic opening system and panel sliding plastic wheels with steel pivot pins.
*Do not include power cable
MACHINE CONFIGURATION
(Options and accessories included with this machine)
- Electrical voltage 220/230 50/60 Hz
- "Nesting" copying device kit
- "AAR" anti-adhesive unit
- Spray-mist device for edge finishing
- "SGP" glue pot with manual dosing in substitution of the standard one
- Automatic glue roller cleaning device
- "RC-N" glue scraping unit
- "SP-V" brushing unit
TECHNICAL FEATURES | ||
Variable track feed speed | m/min | 12 - 18 |
Panel thickness | mm | 8-60 |
Thickness of edges in strips | mm | 0,4 - 6 |
Thickness of rolled edges | mm | 0,4 - 3 |
Max. section of rolled edges | mm² | 135 |
Coil-holder plate diameter | mm | 780 |
Distance between two successive panels | mm | 600 |
Minimum panel length (100 mm min. width) | mm | 140 |
Min. length of edge in rolls | mm | 180 |
Min. length of edge in strips | mm | 220 |
Min. panel width (210 mm min. length) * (60mm with unit adjustment modification) | mm | 95 (60)* |
Opening for panel support roller | mm | 560 |
Worktable height | mm | 900 |
| Voltage/frequency | 230 volt/60 hz |
