olimpic k 360 Single-sided automatic edge bander
C$77,000.00
(Shipping and installation* included, taxes not included)
*Applicable only for models that require SCM installation
Automatic single-sided edge bander for the edge gluing with hot melt glue on straight panels, on the four panel sides, finishing and rounding-off of the panel corners
Compact and easy-to-use due to its advanced technological solutions designed to ensure optimal panel finishing. It is simply the perfect edge bander for companies who require continuous and high quality edge banding of panels even though they may be different from one to another.
The use of "multiedge" machining heads with electronic axes allows the machine to be set up automatically to machine panels with 2 different radii, solid wood and thin edges.
*Photos may include optional equipment. Please verify availability and compatibility under Product Details and Specs.
Available 2
Item ready for delivery
K 360 TE INSTALLATION
End cutting unit: cut and "radius" in a single operation.
Automatic and error free cutting of thick edges due to the particular system with two blades that allows the straight cutting of solid wood edges and the chamfering of the thin edges.
Nesting copier on trimmer and edge scraper units for processing panels from nesting cycle.
SGP-E glue pot for the use of EVA and PUR glue with double thermoregulation. Special spreader roller with variable pitch knurling. Quick release system.
StarTouch control: just a ""touch"" to use the machine.
Error free machining with the touch-screen display with its customised graphics that allows an intuitive and easy selection of the main machine functions.
- Main frame made of bended and welded steel plates to ensure a high rigidity structure
- Top steel presser, complete with two rows of rubber coated wheels mounted on bearings and enclosure that covers the wheels.
- Manual adjustment of presser at machine infeed with positioning numerical readout
- Top operating groups fixed to the presser or mechanically connected on to it to allow the automatic positioning according to the panel thickness. Lower groups fixed to the horizontal beam for a precise reference with respect of the panel.
- All frequency motors equipped with inverter.
- Safety enclosure on the entire length of the machine with poly-carbonate windows for the groups visualisation during machining.
- Exhaust outlets for the operating groups positioned on the top side of the safety enclosure
- Mobile control panel at machine infeed for an easy use from the operator's working position
- Electrical cabinet positioned inside the main frame with door that allow an easy access in case of any maintenance operations. The cabinet is in conformity with the current safety regulations
- Feed track made of pads coated with high friction rubber fixed on n ¾ industrial chain.
- Sliding of pads on two guideways , one round and one flat, to ensure straightness of movement and resistance to side loads
- Manual pads lubrication
- Panel support rollers positioned parallel to the track. It can be extended on the entire lengh of the machine. It is made of telescopic opening system and panel sliding plastic wheels with steel pivot pins.
*Do not include power cable
MACHINE CONFIGURATION
(Options and accessories included with this machine)
- Electrical voltage 220/230 50/60 Hz
- "AAR" anti-adhesive unit
- Spray-mist device for edge finishing
- "SGP-E" glue pot - Instead of the standard one
- "K-2 Radius" end cutting unit
- "RC-N" glue scraping unit
- "SP-V" brushing unit
TECHNICAL FEATURES | ||
Track feed speed | m/min | 11 |
Panel thickness | mm | 8-60 |
Thickness of edges in strips | mm | 0,3-6 |
Thickness of rolled edges | mm | 0,3-3 |
Max. section of rolled edges | mm² | 135 |
Coil-holder plate diameter | mm | 780 |
Exceeding material to the panel thickness | mm | 2+2 |
Distance between two successive panels | mm | 600 |
Minimum panel length (100 mm min. width) | mm | 140 |
Min. length of edge in rolls | mm | 180 |
Min. length of edge in strips | mm | 220 |
Min. panel width (210 mm min. length) | mm | 90 |
Opening for panel support roller | mm | 500 |
Worktable height | mm | 900 |
| Electrical voltage | 230/60 Hz |
